Welcome to SEMCO. We Provide Lithium-Ion Cell & Battery Testing and Assembly Solution.
Semco Battery Balancer 32S-10A 175,000.00

Semco Battery Equalizer 124-02A

105,000.00

Produced by Semco Infratech Pvt. Ltd. Lithium battery pack balance maintenance instrument is a maintenance equipment for lithium battery packs of new energy vehicles. It can solve the problem that after the power battery is connected in series and formed into a group, due to the inconsistency of each single battery, the problem of unbalanced power of the battery monomer continues to expand, resulting in shortened battery life, reduced cruising range, and even complete battery failure. The main design idea is to analyze and judge the deep-seated problems of the battery pack by collecting single battery parameters and using intelligent algorithms. Adopting the method of “refilling all the strings”, the backward batteries are accurately recharged to ensure that each string of single cells is fully charged, and the power difference between the single cells in the group is maintained to the factory level. Thus, the short board effect of the battery pack is eliminated, and the capacity of the entire battery pack is restored to close to the factory level.

In Stock

Add to Wishlist
Add to Wishlist
SKU: Semco SI BE 124-2A Category: Tag:

Description

Limit Working Parameters and Use Environment:

  • The maximum allowable input voltage range of the power supply: 176V to 264V.
  • The maximum allowable range of product working environment temperature: -40°C to 60°C.
  • The maximum allowable range of product working environment humidity: ≤ 90%, no condensation, no strong vibration, no corrosive gas.
  • The maximum allowable storage temperature of the equipment: -55°C to 80°C (Note: The equipment cannot be stored at the highest or lowest limit temperature for a long time).
  • Overall size: (a) (24 series model) length × width × height: 300×220×150mm
  • Total Weight: (a) 24 strings: 7KG (Including output wiring harness)

Notice: Each unit can be connected to 12 single batteries, and the maintenance instrument can automatically identify the number of battery strings. The different definitions of the positive and negative ends of the battery harness can be set on the screen.

Basic Parameters and Main Technical Indicators:

  • Power supply rated input voltage: AC220V±15%
  • Power input frequency: 50Hz±10Hz
  • Maximum output power for 24 strings: 300W
  • Maximum power consumption of 36 strings: 375W
  • Single string output current: 0.5-2.5A adjustable
  • Maximum output voltage of a single string: 5V
  • Adjustable range of battery charging output cut-off voltage: 1.500V to 4.350V
  • Adjustable range of minimum allowable initial voltage for battery charging: 1.000V to 4.350V
  • Battery voltage measurement accuracy: ±10mV without calibration, ±10mV for full temperature range, ±1mV after calibration, calibration once every six months or when the environmental temperature difference is large;
  • Equipment pressure performance: Power input wire to battery wire harness: ≥2500V, Power input line to shell: ≥2500V
  • Equipment insulation performance: ≥10MΩ
  • Output reverse connection, cross connection single string withstand voltage: 80V
  • Protection level: IP21
  • Cooling method: air cooling
  • Flame retardant rating: 94V-0

 

User Manual:

Semco Battery Equalizer 124-02A: User Manual – Click Here To Download

Additional information

Weight 5.06 kg
Dimensions 30 × 22 × 17 cm

Reviews

There are no reviews yet.

Be the first to review “Semco Battery Equalizer 124-02A”

Your email address will not be published. Required fields are marked *